S t a n d a r d – loads the standard settings for the system. The illustration below shows the location of the onboard LED. This protection eliminates the need to buy a replacement ROM chip. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. Setting to Auto allows the system to detect the presence of USB devices at startup. Setting a very high memory voltage may damage the memory module s! B A Load plate 5.

Uploader: Daill
Date Added: 6 July 2016
File Size: 17.13 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 21879
Price: Free* [*Free Regsitration Required]

Support the DIMM lightly with your fingers when pressing the retaining clips.

The illustration below shows the location of the onboard LED. Shut down and reboot the system so the BIOS can automatically reset parameter settings to default values.

Usb Configuration – Asus Motherboard P5LD2-VM DH User Manual [Page 70]

Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.

Failure to do so can cause you physical injury and damage motherboard components. Refer to the BIOS screen on page P5,d2 no floppy disk is found, the utility automatically checks the optical drive for the original asuus updated BIOS file.


Close the load plate Athen push the load lever B until it snaps into the retention tab. If this happens, revert to default settings. Align the card connector with the slot and press firmly until the card is completely seated on the slot. Sub-menu items Navigation keys 2.

PCB color and bundled software sub are subject to change without notice.

ASUS P5LD2-VM DH – motherboard – micro ATX – LGA Socket – iG Overview – CNET

This motherboard supports one PCI Express x16 graphics card. All of these are done on one computer. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file.

When set to [Disabled], the data transfer from and to the p5pd2 occurs one sector at a time.

In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. ASUS MyLogo2 You can convert your favorite photo into a color boot logo for a d colorful and vivid image on your screen. Enabling Intel Viiv platform also requires: This high speed interface is software compatible with existing PCI specifications.

New Drivers  EPSON EPL N2550 DRIVER

For system failure due to overclocking, use the C. Locate the BIOS file from the e.

Use the navigation keys to select items in the menu and change the settings. Assign an IRQ to the card.

ASUS Digital Home Series

If the d becomes unstable after changing any BIOS settings, load the default settings to ensure system compatibility and stability. The D r i v e r s menu appears.

Side Speaker Out Below: Incorrect field values can cause the system to malfunction. Make sure that your power supply unit PSU can provide at least the minimum power required by your system.

Allows you to set the system date. This item is set to [Auto] by default. Make asud to unplug the power cord before adding or removing expansion cards. See the table below for details. DO NOT place jumper caps on the fan connectors. The ASIC monitors the voltage levels to ensure stable supply of current for critical components.

Please refer specification pages for full details.