If the product does not turn on with the alternate power cord, continue to the next step. When the carriage stops moving, remove the power cord from the rear of the product. To determine if the paper is the cause, try using some clean and undamaged sheets of plain, inkjet-rated 70 to 90 gsm to pound bond paper, such as HP Multipurpose or Bright White paper. While printing or scanning, the product loses communication with the computer. Before loading paper in the tray, hold the stack of paper, and then tap the bottom edge on a flat surface so that the stack is even on all sides. If you cannot remember, follow these steps:.
|Date Added:||21 July 2013|
|File Size:||43.36 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Printer Specifications for HP Deskjet F2200 All-in-One Printer Series
Make sure that the control panel overlay is installed correctly If the control panel overlay, or bezel, is incorrectly installed, the product might indicate a false error condition.
Blinks quickly for 20 seconds, and then stays on. For more information, go to www. Check the scanner light Press the Start Copy Color button on the control panel to make a color copy of any document. If the message on the computer does not identify a particular cartridge it says only Print cartridge errorfollow these steps to determine which cartridge is causing the problem. You must type a custom size name in the Name box.
Either missing, not detected, or incorrectly installedthen the cartridge you have removed is the problem cartridge. See your browser’s documentation for specific instructions. Clean the problem cartridge contacts Follow these steps in the order given to clean the electrical contacts:. Use both hands to pull any whole sheets of paper to avoid tearing them. Europe, Middle East, Africa.
Push the power cord into the electrical outlet to make sure that the connection is secure. Close the cartridge access door.
Open download list Do not mix different types, weights, or hl of paper. If Save is unavailable, make sure that there is a name for the setting in the Name box. HP Deskjet F printr are tiny programs that enable your F22000 Printer hardware to communicate with your operating system software. If the issue persistscontinue to the next solution.
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify plastics for recycling purposes at the end of the product’s life. Remove the protective tape. Test the power with a compatible power cord from a different product If you have another available power cord that is compatible with your product, install the alternate cord, and then follow these steps to reset the power module and test the power.
If the product never finishes the task, and the lights continue to blink, continue to the next solution. With the product turned on, disconnect the power cord from the rear of the product.
Let HP 2f200 any out-of-date or missing drivers and software. Clear any carriage path obstructions Follow these steps to clear any carriage path obstructions, and then print a self-test report.
HP Deskjet F Printer series drivers – Download
Reset the All-in-One Follow these steps in the order given to reset the product. Slide the two pins on the right side of the door into the two holes on the right of the product, and then snap the left side into place.
Load the alignment page. Make sure that the paper is free of rips, dust, wrinkles, and curled pprinter bent edges.
If the carriage is stuck in the middle of the productmove the carriage to the right side of the product. If the product finishes the task, there is no need to continue troubleshooting. Create a custom paper size only if the correct paper size is not an option. jp
Experiencing frequent or recurring paper jams? Hl you do not, the Save button is unavailable when you try to save the setting. Before loading paper in the tray, hold the stack of paper, and then tap the bottom edge on a flat surface so that the stack is even on all sides.