Previously boxer3main the death rate and fairy tales cannot kill the nature left behind. Most drivers allow you to change the com port number through the device manager. Using the proper settings is crucial to successfully using your USB-serial adapter. In this case it was COM1. They should not be offered by any reseller and WILL cause you problems. Polls What would you like to see in TunerStudio 3. What to look for in a USB cable:

Uploader: Yozshucage
Date Added: 25 February 2004
File Size: 20.5 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 45908
Price: Free* [*Free Regsitration Required]

The Megasquirt serial port.

USB-Serial Adapter Connectivity

In this ubs it is normal for TunerStudio to report no connection and for the firmware loopback tests to fail. Ensure your Megasquirt is powered and megatne to your computer. Originally posted by thesilverbuick View Post.

It was causing major confusion with a customer because it was “known good” working with other MS3s, but failed to work on MS3-Pro. MS2-Extra Serial connection setup. As supplied, most Megasquirt-2 in kit form are supplied ‘blank’ without firmware loaded. If tests A and C pass, but B fails then you most likely do not have firmware installed on your processor – double check that you have loaded it and retry the ‘portcheck’ step above.


I’d check in udb properties for resources matching your usb port and find an empty one.

Megasquirt Serial Setup

If tests A, B and C all pass but you are having problems with the tuning software, it is most likely a settings problem within the tuning software itself. No part of this manual may be reproduced or changed without written permission from James Murray, Ken Culver and Philip Ringwood.

If that isn’t uxb, you may want to consider using a Bluetooth to RS adapter. GPS Mapping with scatter plot overlay. I power mine off the lighter to avoid the dropout.

Data log Sound and video in parallel to MS data logs. Users browsing this forum: If you don’t know how to do this, here are directions for getting into the Device Manager for XP and Vista. If it has not, try the cable and CPU socket loopback tests.

Last edited by Beagle ; August 19th, Ensuring there are no shorts underneath the board, re-connect your serial cable and apply power. They should not be offered by any reseller and WILL cause you problems. Think about your typical car electrical system; low voltage with high current to make up for it. Just ordered one with BT so hopefully that solves the issue. From there, click System and Maintenance, then click on the Device Manager from there.


Megasquirt Support Forum (MSEXTRA)

I remember the invention. There are several devices to fill this gap, but by far the most common is a USB to serial cable, this can fill the need and no one will miss the old Real DB9 on their laptop. Also be sure the drivers are correctly installed before attempting to adjust any settings. Standard DB9-DB9 straight through serial cable: Select the baud rate. This would usually indicate either your forgot to plug in your USB-serial cable or there is a driver problem.

For Vista, click the Start button and go to the Control Panel.

Board index All times are UTC. If you are preparing to use a USB-serial adapter for the first time, download and run the appropriate driver installer before plugging in the adapter. However, look the substantial difference in the signal voltage:. Whatever you type into the top window should appear in the lower window. Maybe meegatune a simple list on their website would be a start?